Step 16
：
Connecting wire
Assemble parts specifications and quantity
：
Main framework
Power wires 2pcs
USB cable 1pcs
LCD cable 2pcs
Motor wires 4P*5pcs
Winding Pipe 1pcs
Power plug 1pcs
Mainboard and LCD wiring diagram
Printer wiring parts schematic
1, Open the cover of the electronic board.
2.Connect the terminal of the electronic board and the LCD
with the LCD cable 1,LCD cable 2,same as above illustration,
3.Plug the motor wire to the terminal of the electronic board,
same as above illustration
4.Plug the switch wire of the X,Y,Z to the terminal of the
electronic board,same as above illustration
5.Connect the heatbed and the thermistor to the mainboard
terminal , there are no '+' and '-' different of the heatbed.
6.Insert the wire terminals of the printing head fan into the
terminal of 4010 Fan-1, 4010 Fan-2 on the electronic board .
Plug the terminal of the printing head heading plate to the
terminal of the Extr.Thermistor, then lock the soaked tin wire
of the heating plate and Extruder terminal of the electronic
board.
Heatbed 4P wires
7, Connect the 2pcs power wires to the mainboard , the red to '+', the black to '_'
8, Different countrys are different voltage, select 110V or 220V.
9, Connect the fan on the cover to the mainboard, the red to '+', the black to '-'.
10.Plug the power supply cable,adjust the printer,make sure it
can run,wrap the wire with the pipe .Finally, close the cover.
Extruder 10P wires
Z-motor 1
Z-motor 2
Y-Motor
X-Motor
Extr.motor
Y Endstop
Z Endstop
X Endstop
4010 Fan 2
4010 Fan 1
Heat
Extruder
