TRONITEK DENAS-Applicator, Operating Manual, Page: 39 / 64

39
3. TREATMENT PROCEDURE USING
DENAS-APPLICATOR
For hygienic purposes, wipe the electrode with soft lint-free
cloth moistened with a standard disinfectant solution (such as
3% hydrogen peroxide solution).
Warning!
If the skin is very dry, you may slightly
moisten the skin surface with the physiological salt
solution 5 to 10 minutes before application of the
detachable electrode to make sure that the electrodes
are in tight contact with the skin and to enhance the
treatment effect.
Warning!
Before treatment it is obligatory to
remove all the conductive elements in the area of
stimulation (jewelry, etc.). Stimulation in the presence
of any conductive elements in the area of treatment is
forbidden and can cause electrical burns.
3.1.
Fix the detachable zone-specific electrode in the area to
be treated: for example in the zone of direct projection of the
most painful area in case of back pain or on the respective joint
in case of joint pain. If needed, treat the respective segmental
zones using the electrode.
3.2.
Connect the electrode to the dynamic electrical nerve
stimulation unit (if needed, use a special adapter).
3.3. Switch on the dynamic electrical nerve stimulation unit.
Select the required stimulation frequency on the unit. Use
the respective buttons to set the treatment intensity (see the