tronical TronicalTune Manual Download Page 26

Page: 26 / 48

BAT

e B G

A E

BAT

e B G D A

sequence

tune the guitar to the desired tuning Preset.

change the Pitch oF one string (reFerence string)

by manually turning the key.

enter and eXecute reFerence mode

to enter reFerence tuning mode:

Push “

“ button. the system comes uP with the last comPleted

tuning in multi-string mode. Push “

BAck

“ button to enter

tuning

selection mode

. menu led is oFF.

now Press and hold the “

“ button until menu led lights uP

white. Press

“LeFt/rIGht“

button to select “d“-led.

Press “enter“ For

reFerence tuning

mode. the menu led switches

oFF, e-led Flashes red.

Press “

LeFt/rIGht

“ button to select the reFerence string.

Pluck your reFerence string measurement begins indicated by

quick Flashing yellow led oF resPectiVe string. uPon comPletion

the resPectiVe led lights uP green and all others are shining red.

strum all strings (multi-string mode).

the system will tune your guitar to the selected

tuning Preset in relation to the measured reFerence Pitch.

enter

BAT

e B G D A E

move to retuned strInG

the latest comPleted reFerence tuning is aVailable on

start-uP until you comPlete any other tuning.

should you wish to store your reFerence tuning reFer to

“custom tuning“ Page 24-25.

www.tronical-comPonents.com

reFerence tunInG

FunctIon menu

Summary of Contents for TronicalTune

















































Search results

Summary of Contents for TronicalTune

Reviews:

Related manuals for TronicalTune

Brands by name

Popular brands

tronical TronicalTune, Manual

Search results

Summary of Contents for TronicalTune

Reviews:

Related manuals for TronicalTune

Brands by name

Popular brands