GB
│
MT
│
85
■
TKHU 2 A2
Handling and use
Fitting the car cradle
♦
Unscrew the screw ring
4
anticlockwise from the
car cradle .
♦
Place the screw ring
4
over the ball joint
9
and
press the ball joint
9
into the ball joint socket
5
(see fig . C) .
♦
Screw the screw ring
4
clockwise onto the ball
joint socket
5
until tight
Fitting the vent clip
♦
Pull the lever
1
towards the car cradle and hold it
in place .
♦
Guide the hook
2
between two ventilation slots
and hook it onto a ventilation slot .
♦
Release the lever
1
slowly and, at the same time,
place the two cut-outs
3
onto a ventilation slot .
♦
Align the car cradle so that the two arms of the vent
clip rest on the fitting . You can use the 360° rotating
ball joint
9
to adjust the car cradle horizontally
and vertically to suit your requirements . Loosen the
screw ring
4
a little to make it easier to adjust the
ball joint
9
.
Summary of Contents for TKHU 2 A2
