Tronic TKHQ 10 A1, Operating Instructions Manual

Page: 16 / 82

TKHQ 10 A1 GB
│
CY
│
13 ■
♦
Plug the car/USB adapter
0
into the 12/24 V socket (cigarette lighter)
in your vehicle .
The operating LED
8
lights up white to indicate that the car/
USB adapter
0
is ready for use .
Depending on the vehicle type, it is possible that the ignition has to be
switched on first .
CAUTION
►
The total power consumption of the devices connected to the two
USB sockets
7
/
9
may not be higher than 5 .4 A . Make sure that the
power consumption of your device is no higher than 3 A when you
are using the USB socket
9
(green) . When you are using the USB
socket
7
, make sure that the power consumption of your device is no
higher than 2 .4 A . Refer to the operating instructions of your device
for more information .
►
The maximum power output of the car/USB adapter
0
is 5 .4 A .
The maximum power output of the USB socket (green)
9
is 3 A .
The maximum power output of the USB socket
7
is 2 .4 A .
NOTE
►
The USB socket (green)
9
supports the Qualcomm ® Quick
Charge
TM
3 .0 standard . If the connected device is compatible with
this charging standard, it will be detected by the car/USB adapter
0
automatically . The car/USB adapter
0
supplies the appropriate
output voltage or output current so that your device can be charged
more quickly . Devices without this charging standard can also be
charged using the USB socket (green)
9
.