TCA 3 A1
GB
│
IE
│
7
■
Setting up
ATTENTION
►
The total power consumption of the devices connected to all the USB
sockets
3
may not be higher than 3 .4 A . For each individual USB
socket
3
the current consumption of your device must not exceed
2 .4 A . Refer to the instruction manual of your device for more
information .
►
The maximum power output of all the USB sockets
3
together is 3 .4 A .
The maximum power output of each USB socket
3
is 2 .4 A .
♦
Connect the car charger adapter to the 12/24 V connection of your
car . This is usually the vehicle socket (cigarette lighter) on the dash-
board of your vehicle . Many vehicles have a second socket by the rear
seats or in the boot . 24 volt batteries are sometimes used in vehicles
such as lorries or boats .
♦
The operating LED
1
lights up white to signal that the car charger
adapter is being supplied with power . The operating LED
1
also lights
up if no device is connected . Depending on the vehicle type, it is
possible that the ignition has to be switched on first .
♦
Connect your device to the car charger adapter . For USB devices,
use the original USB cable of your device for optimal charging .
♦
If you need to, you can switch on your connected device and continue
using it .
NOTE
►
Monitor the charging status on your connected device .
IB_373026_TCA3A1_LB8.indb 7
IB_373026_TCA3A1_LB8.indb 7
01.09.2021 14:17:18
01.09.2021 14:17:18
Summary of Contents for TCA 3 A1
Page 3: ......
