background image

- 3 -

Vehicle adapter

Adapter plugs

e

3.5 mm Barrel connector

r

5 mm Barrel connector

t

5.5 mm Barrel connector

z

2.5 mm Jack plug

u

3.5 mm Jack plug

Adapter cable

Power supply unit

Safety instructions

This appliance is suitable for use ONLY 
indoors.

• This appliance is not intended for use by individuals

(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
appliance is to be used. 

• Children should be supervised to ensure that

they do not play with the appliance.

• Check the appliance and all parts for visible 

damages. The safety concept can work only if
the appliance is in a faultless condition.

• The plug must always be easily accessible, 

so that the appliance can be quickly separated
from the mains power supply in the event of an
emergency.

To avoid potentially fatal electric
shocks:

• Connect the power supply unit only to correctly

installed and earthed mains sockets. The mains
voltage must conform with the specifications on
the ratings plate of the power supply unit.

• Only use the supplied power supply unit. 

If you replace the power supply unit, only replace
it with one of the same model.

• To avoid risks, arrange for defective power plugs

and/ or cables to be replaced at once by 
qualified technicians or our Customer Service
Department.

• Never submerge the appliance or the power

supply unit in water. Wipe it only with a slightly
damp cloth.

• Do not expose the appliance to rain and never

use it in a humid or wet environment.

• Ensure that the power cable never becomes wet

during operation.

• Do not open the casing or attempt to repair the

appliance yourself. Should you do so, appliance
safety can no longer be assured and the warranty
will become void. 

• Protect the appliance against drip and spray 

water. Do not place any water-filled vessels 
(e.g. flower vases) on the appliance.

• Should water permeate into the Energy Station

or the power supply unit, or if they fall into water,
irreparable damage can occur and there also
exists the risk of receiving an electric shock!

To avoid the risk of fire caused by
short circuits:

• Ensure that the screw connectors can never be

short-circuited, for example, by a loose cable.
For operational reasons these connections are not
protected – this means that very high currents
can flow (over 15 A).

• Do not use the appliance in the vicinity of hot

surfaces.

• Do not retain the appliance in places exposed to

direct sunlight, Otherwise, it may overheat and
become irreparably damaged. 

• Do not leave the appliance unattended when 

in use.

  

  

 

  

 

Summary of Contents for KH 3002















Reviews: