Tronair 14-6895-6000, Operation & Service Manual, Page: 5 / 11

Model: 14-6895-6000
Aircraft Strut Pressure Gauge
09/2000 | Rev. OR Page | 2
3.0 ASSEMBLY INSTRUCTIONS
NOTE: It is recommended Nitrogen servicing procedure should be accomplished in conjunction with Tronair Service
Regulator/Model: 14-6804-6000.
1. Reference Figure 1 during the following steps.
2. Ensure (D) Nitrogen Supply Valve is closed (OFF).
3. Connect (H) Pressure Regulator to Nitrogen supply (not included) if not already connected.
4. Decrease (H) Pressure Regulator to the minimum pressure setting; the regulator adjustment knob is a rotating type.
Clockwise rotation of the knob increases pressure and counter-clockwise rotation decreases pressure.
5. Turn valve handle clockwise to close (A) Air Bleeder Valve.
6. Connect (F) Hose Coupling to (G) Pressure Valve.
7. Ensure (C) Nitrogen Charging Valve is in closed position. (Refer to Aircraft Maintenance Manual)
8. Connect (B) Hose Coupling to (C) Nitrogen Charging Valve.
9. Open (C) Nitrogen Charging Valve. (Refer to Aircraft Maintenance Manual)
10. Turn handle clockwise on (B) Hose Coupling to depress valve core in (C) Nitrogen Charging Valve.
11. Open (D) Nitrogen Supply Valve.
12. Adjust (H) Pressure Regulator until (E) Pressure Gauge reads desired pressure.
3.1 DISASSEMBLY
1. Reference Figure 1.
2. Close (C) Nitrogen Charging Valve. (Refer to Aircraft Maintenance Manual)
3. Turn handle counter-clockwise on (B) Hose Coupling to release valve core in (C) Nitrogen Charging Valve.
4. Close (D) Nitrogen Supply Valve (OFF).
5. Bleed off any excess Nitrogen in gauges and lines by turning valve handle counter-clockwise to open (A) Air Breeder
Valve.
6. Disconnect Pressure Gauge Assembly from strut and Regulator Assembly.
4.0 PARTS LIST
Reference following page for ordering information of Replacement Parts and Kits.
When ordering Replacement Parts/Kits, please specify Model & Serial Number of your product.
FIGURE 1