background image

Model:  02-7854C0110 

12 & 25 Ton (10.87 & 22.68 Metric Ton) Axle Jack 

 

03/2008 | Rev. 02 

Page | 4 

 

9.0 

GUARANTEES/LIMITATION OF LIABILITY 

Tronair products are warranted to be free of manufacturing or material defects for a period of one year after shipment to the 
original customer. This is solely limited to the repair or replacement of defective components. This warranty does not cover the 
following items: 

a)  Parts required for normal maintenance 
b)  Parts covered by a component manufacturers warranty 
c) 

Replacement parts have a 90-day warranty from date of shipment 

If you have a problem that may require service, contact Tronair immediately. Do not attempt to repair or disassemble a product 
without first contacting Tronair, any action may affect warranty coverage. When you contact Tronair be prepared to provide the 
following information: 

a)  Product Model Number 
b)  Product Serial Number 
c) 

Description of the problem 

If warranty coverage is approved, either replacement parts will be sent or the product will have to be returned to Tronair for 
repairs. If the product is to be returned, a Return Material Authorization (RMA) number will be issued for reference purposes 
on any shipping documents. Failure to obtain a RMA in advance of returning an item will result in a service fee. A decision on 
the extent of warranty coverage on returned products is reserved pending inspection at Tronair. Any shipments to Tronair must 
be shipped freight prepaid. Freight costs on shipments to customers will be paid by Tronair on any warranty claims only. Any 
unauthorized modification of the Tronair products or use of the Tronair products in violation of cautions and warnings in any 
manual (including updates) or safety bulletins published or delivered by Tronair will immediately void any warranty, express or 
implied. 
 
The obligations of Tronair expressly stated herein are in lieu of all other warranties or conditions expressed or implied. 

Any 

unauthorized modification of the Tronair products or use of the Tronair products in violations of cautions and 
warnings in any manual (including updates) or safety bulletins published or delivered by Tronair will immediately

 

void any warranty, express or implied 

and Tronair 

disclaims any and all liability for injury (WITHOUT LIMITATION and 

including DEATH), loss or damage arising from or relating to such misuse

.

 

 

10.0 

APPENDICES 

APPENDIX I 

Enerpac Instructions & Repair Parts List 

APPENDIX II 

Safety Data Sheet 

 Hydraulic Fluid MIL-PRF-5606 

APPENDIX III 

Declaration of Conformity 

APPENDIX IV 

Maintenance Schedule 

 

Summary of Contents for 02-7854C0110
















































Reviews: