Models: 02-0517C0140 & 02A0517C0140
5 Ton (4.5 Metric Ton)
Two Stage Jack
09/2006 - AA - Rev. OR
- 3 -
1.4.2 Jack
Instructions
(continued)
3.
Close pump release valve by turning clockwise.
NOTE:
Turning the pump release valve counter-clockwise lowers the jack. Turning the pump
release valve clockwise stops the jacks descent, and allows it to be raised.
4.
If air pump is to be used, be sure shop air needle valve is closed and attach shop air (125
psi/8.6 bars Maximum) to needle valve. Open needle valve and operate air pump. Close
needle valve when ram reaches required height.
5.
Hydraulic rams must be completely retracted before operating the jack.
6.
Close pump release valve and operate pump.
1.4 Operating instructions continued on following page
LOCKING PIN
RAM PROTECTION RING
CORRECT PIN
PLACEMENT
MECHANICAL EXTENSION
BALL LOCK
AREAS TO BE FREE
OF INDENTATIONS
RAM PROTECTION RING
LOCKING PIN
RAM PROTECTION RING
INCORRECT PIN
PLACEMENT
MECHANICAL EXTENSION
BALL LOCK
LOCKING PIN
RAM PROTECTION RING
INCORRECT PIN
PLACEMENT
MECHANICAL EXTENSION
BALL LOCK
Summary of Contents for 02-0517C0140
Page 2: ......