Tronair 02-0511C0132, Operation & Service Manual

Page: 7 / 42

Model: 02-0511C0132
5 Ton Two Stage Jack
02/2017 | Rev. 04 Page | 4
6.0 OPERATION (continued)
6.3 OPERATOR CONTROLS
6.4
OPERATING INSTRUCTIONS
The user should be familiar with the following statements prior to using the jack(s):
CAUTION!
1. Never put hands between the aircraft and the jack pad; as after aircraft has been lowered, struts may
have hung up.
2. Always lower ram locking nut(s) after jack is under load. Be sure ram nut(s) is seated fully after
jacking.
3. Always raise and lower jacks simultaneously so that aircraft remains level.
4. Always use a tail or nose stand, as applicable, for additional stability.
WARNING!
When collapsing rams by hand miss-staging may occur and cause pinch points. To collapse ram, add a
minimum 50 lb load to the mechanical extension. Keep hands and fingers clear of locking nuts. Failure to
adhere to this safety instruction can cause injury.
6.4.1
Rules For Operating
1. The user shall work in accordance with the Operator and/or Technical Manuals.
2. It is not allowed to work under the raised load until it is secured by suitable means, i.e. Ram Locknut.
3. The employer of the operator shall provide for all necessary training and give information about pumping and translating
forces.
4. Operate between -20

C and 50

C/-4

F and 122

F.
6.4 Operating instructions continued on following page.