USER MANUAL TXB30LS, V19.01
page
|
5
Technical changes, misprints and errors are reserved
Safety Instructions for commissioning
•
The lift may be installed and commissioned by authorized service personnel only.
•
The standard lift version may not be installed and commissioned in the vicinity of
explosives or flammable liquids.
•
The standard lift version may not be installed and commissioned outdoors or in
moist rooms (e.g. car wash).
Safety Instructions for Operation
•
Carefully read the User Manual.
•
Lift operation by authorized personnel over 18 years only.
•
Always keep the lift and lift area clean and free of tools, parts, debris etc.
•
Once the pads contact the lifting points of the vehicle, check if the pads are in the
correct position.
•
After raising the vehicle briefly, stop and check the pads for secure contact.
•
Always lift the vehicle using all four pads!
•
Make sure the vehicle doors are closed during raising and lowering cycles.
•
Closely watch the vehicle and the lift during raising and lowering cycles.
•
Do not allow anyone to stay in the lift area during raising and lowering cycles.
•
Climbing up the raised lift or vehicle is prohibited.
•
Only use the lift for its intended purpose.
•
Comply with the applicable accident prevention regulations.
•
Do not overload the lift. The rated load capacity is indicated on the lift nameplate.
•
Only use the vehicle manufacturer´s recommended lifting points!
•
After positioning the vehicle, apply the parking brake.
•
Use caution when removing or installing heavy components (center-of-gravity
displacement)!
•
The main switch also serves as
EMERGENCY SWITCH
. In case of emergency
turn it to the
position “0”
.
•
Protect all parts of the electrical equipment from humidity and moisture.
•
Protect the lift against unauthorized usage by padlocking the main switch.
