Historical data from all of the sensors are automatically recorded and
stored within the HCS-3. That data can be viewed by the user directly
on the touch-screen display, on the app or on the Web program. The
user can select which sensor data to display, and to view 24-hour,
7-day or 30-day historical charts.
System Setting Interface
Tap on the nut icon on the bottom of the column to access the
different pages for system settings including program backup, restore
factory setting etc.
The system setting page is for the controller’s basic settings including:
General
Alarm Setting
Calibration
System Reset
Screen Lock
Deadband
Import / Export
Serial Number
1.General Settings: Room Status, Date, Time, Time Zone, DST, Auto
Time Calibration, Time format, Brightness etc.
2.Alarm Settings: Maximum and Minimum Day and Night Alarm
Setpoint for Temperature & Humidity, Light, CO2 and VPD etc.
3.Calibration: Calibration for Temperature, Humidity and CO2
sensors.
4.Deadband: Set Deadband Setpoints for Temperature, Humidity
and CO2
.
5.System Reset: Options include Factory Reset, Firmware
Update, Sensor Reset and Device Reset.
5) Firmware Update
6.Screen Lock: Screen Saver and Passcode setting.
7.Import/Export: The user can save & restore their controller
settings by using the Import / Export functions. The export will
save all settings on the MicroSD card, Import will restore all
settings from the MicroSD card, back into the HCS-3 controller.
(only support exFAT & FAT32 format)
8.Serial Number: Users can check the serial number of the
controller on this page. The QR code on the controller is what you
will scan to add your HCS-3 controller to the TM+ app.
System Reset
Factory
Reset
Firmware
Update
Sensor
Reset
Device
Reset
Firmware Update
Update
Update
Current Version
：
11.11
You want to update the software.
16
17
Summary of Contents for HCS-3
Page 1: ...Quick Instruction HCS 3...
