AIR XS USER MANUAL
5
Always observe the safety precautions detailed in this user manual. Personnel installing, operating,
or maintaining the equipment are responsible for their personal safety and correct handling of the
equipment in accordance with all safety instructions detailed.
Follow all warnings and instructions marked on the instrument. Warning labels are situated on the
instrument, indicating a hazard at or near the location of the warning label.
Retain these instructions in a safe and known place for future use.
The Air XS has been designed to be as simple to install and commission as possible. Nevertheless,
installation in working environments can be challenging and correct set up is critical to the function
of the instrument. It is important that you carefully read the entire User Manual before using and
installing the Air XS for the first time and keep it in a safe place for future reference.
Peripheral components such as the power supply and communications module/peripheral or
interface must be installed according to the manufacturer’s instructions and the installation
location’s prevailing statutory regulations.
The installation of the instrument must only be carried out by competent personnel. Each
installation needs to be considered with reference to the local safety regulations and authorities.
Observe the national safety regulations issued, for example, by the employers’ liability insurance
association, social security institutions, occupational safety and health or other safety authorities.
4. SAFETY PROCEDURES
The Air XS is rated via the Class 1 ‘Laser Safety Guideline’ under all conditions of normal use.
Class 1 laser products may contain laser systems of a higher class but there are adequate
engineering control measures to ensure that access to the beam is not permitted during normal
use.
4.1 Laser safety precautions
WARNING –
Class 3B laser radiation: do not open the laser
housing when the laser is powered on as it may result in eye
damage from directly viewing the laser beam.
