1475-5
3. ASSEMBLY STEP
STEP 01
Fasten Back Rest (2) to Main Frame (1) with four Back Rest Mounting Hardware (3).
STEP 02
Connect Support Leg (4) to Main Frame (1) with one 3/8” x 2-1/4” Hex Bolt (8), 3/8”x19mm Washer (6) and
Knob (7).
STEP 03
Slide Incline Stabilizer Bar (5) into Support Leg (4). Fasten with Adjustment Crossbar (10) at desired height
and tighten with 3/8”x19mm Washer (6) and Knob (7).
STEP 04
Slide Foam Roll (11) onto Adjustment Crossbar (10).
STEP 05
Slide Upper Crossbar (9) through Support Leg (4).
STEP 06
Slide 1” Round Cap (12) on Upper Crossbar (6) one on either side of Support Leg (4).
STEP 07
Attach Foam Roll (11) on Upper Crossbar (9) and Adjustment Crossbar (10).
