Trojan RECUMBENT 400, User Manual

Page: 14 / 32

14
10318
ASSEMBLY STEPS
STEP 1:
• Attach Main Base (1) to the Rear Base (2) using two Hex
Bolts 3/8” x 4-1/8” (94), four Washers 3/8” (90) and two
Lock Nuts 3/8” (85).
STEP 2:
• Slide two Round Bumpers (47) onto the two Guide Rods
(4). Insert two Guide Rods (4) into the two holes of the
Rear Base (2) and secure using two Hex Bolts 3/8” x 1”
(76) and two Washers 3/8” (90). Slide the Weight Base
Plate (32) down as shown.
• Place the Plastic Bushing (36) onto the Weight Selection
Rod (29), in line with the 1st hole, and secure using Pin (34).
• Slide Top Plate (30) down as shown.
• Attach Vertical Post (3) to the Main Base (1) using two
Hex Bolts 3/8” x 4-3/8” (121), four Washers 3/8” (90) and
two Lock Nuts 3/8” (85).
(Don’t tighten the Hex Bolts 3/8” x 4-3/8” (121) yet.)
• Unpack the carton and place all the parts on the floor, carefully removing all packaging.
• Check that all the required parts are in the box.
• When assembling, first assemble all nuts and bolts loosely, then tighten them up once the entire gym is
assembled.
2
1