23
MAINTENANCE
CLEANING
The Trojan Motion 360 Treadmill can be cleaned with a soft cloth and mild detergent. Do not use
abrasives or solvents on plastic parts. Please wipe your perspiration off the Trojan Motion 360 Treadmill
after each use.
Please inspect all assembly bolts and pedals on the machine for proper tightness before use.
STORAGE
Store the Trojan Motion 360 Treadmill in a clean and dry environment away from children.
BELT ADJUSTMENT
Belt adjustment and tension performs 2 functions: adjustment for tension and centring. The
running belt has been adjusted properly at the factory. However transportation, uneven flooring
or other unpredicted reasons could cause the belt to shift off centre resulting in the belt rubbing
with the plastic side rail or end caps and possibly causing damage. To adjust the belt back to its
proper position please follow the directions below.
Your Trojan Motion 360 Treadmill should require little maintenance other than to periodically apply
lubricant.
Lubricating under the treadbelt will ensure superior performance and extend the Trojan Motion 360
Treadmill’s life expectancy.
BELT TRACKING ADJUSTMENT
If during use you notice that the running belt either shifts
to the right or the left of centre, switch off the Trojan Motion
360 Treadmill, remove the “Safety Key” and unplug the equipment
from the AC power source.
If the running belt shifts left, using Allen wrench provided,
turn the left rear roller adjustment clockwise no more than
1/4” of a turn (if the running belt shifts right, adjust the
right rear roller).
Remove the Allen Key, insert the “Safety Key” and insert
the AC power cord into the AC outlet. Turn on your Trojan
Motion 360 Treadmill and observe after running for a few
minutes to see if the problem has been corrected.
This may take several adjustments, so repeat the
above procedure.
HOW TO CHECK RUNNING DECK FOR PROPER LUBRICATION
Lift one side of the running deck and feel the top surface of the treadboard.
If the surface is slick to the touch, then no
further lubrication is required.
Summary of Contents for MOTION 360
Page 9: ...9 EXPLODEDDRAWING...
Page 15: ...15 PRE SETPROGRAMS...
