Trojan IGNITE 360, User Manual

Page: 12 / 25

12
3, 6 and 9.
• While running, single press START / STOP and the running belt will
gradually slow down.
• While running, single press CLEAR to reset all the workout settings.
• Note: the speed setting will not change.
• To stop the running belt, press and release the START / STOP button.
INCLINE FEATURE:
• Incline may be adjusted any time while the running belt is moving.
• Incline can’t be adjusted if the safety key has been removed.
• To reset the Incline, the Trojan Ignite 360 Treadmill will need to be
restarted.
PULSE GRIP FEATURE:
Hold on both stainless steel pulse sensors on the handrails, the Pulse
(Heart Rate) Console window will display your current heart rate during the
workout within 15 seconds.
NOTE:
You must use both stainless steel sensors to display your pulse and your hands should moist to the touch.
CALORIE DISPLAY:
• Displays the cumulative calories burned at any given time during
your workout.
• Note: This is only a rough guide used for comparison of different exercise
sessions and should not be used for medical purposes.
TRANSPORT:
Ensure that the running deck is locked in the up position and carefully lift
the Trojan Ignite 360 Treadmill by the handrails on to the rear roller wheels.
Roll the Trojan Ignite 360 Treadmill away.
PROGRAMMABLE
• Each preset program has a maximum speed level that is displayed when
OPERATIONS:
a desired workout is chosen. The speed that the particular program will
achieve will be displayed in the Speed window. Each program has various
speed changes throughout the workout.
TO SELECT A PROGRAM:
• Ensure that the Trojan Ignite 360 Treadmill has no other programs running.
• Press CLEAR to enter reset the Trojan Ignite 360 Treadmill.
• Press MODE to choose desired program, then press START / STOP to begin
the program with default values.
• The speed window will now be showing the preset speed of the selected
program.
• There are a total of 25 preset programs to choose from. After every 1
minute, the program and speed can be altered manually. 3 seconds before
the ending of the program there will be a 3 beep warning that the program
has come to an end and the running belt will come to a stop.
CONSOLE FUNCTIONS