Trojan Iginte 370, User Manual

Page: 14 / 36

14 10334
GETTING STARTED
Ensure the treadmill is on by plugging it into an appropriate wall outlet and turn on the power switch on the
bottom side of the motor shield. Ensure that the Safety Key is installed, as the treadmill will not power on
without it. When the power is turned on, the treadmill will be ready to use.
SELF CHECK
When using for the first time, it is necessary to do a Self-Check on the treadmill.
This will ensure that there are no problems with the treadmill.
How to do the Self-Check:
• Remove the safety key, press down the MODE button.
• While the MODE button is down, insert the safety key and the treadmill will
prepare to run a Self-Check.
• Press the START/STOP button two times to begin the Self-Check. The Self-Check will finish
automatically after a couple of minutes.
Note: Do not stand on the treadmill during this process.
Quick-Start Operation
• Press the START/STOP button to begin running belt at a speed of 1,0 km/h. The speed can then be
adjusted by either pressing the SPEED UP / DOWN button to adjust the running belt to your desired
speed. You may also use any of the QUICK SPEED buttons (2, 4, 6, 8, 10 and 12 km/h) to adjust the
speed. The HANDRAIL SPEED UP / DOWN may also be used.
• While the running belt is moving at a rapid rate, pressing the START/STOP button will gradually slow
down the running belt to a stop.
• While the running belt is moving, a single press of the CLEAR/SET button will reset Time, Distance and
Calorie values.
Incline Feature
• The incline can then be adjusted by either pressing the INCLINE UP / DOWN button to adjust the
running belt to your desired incline level. You may also use any of the QUICK INCLINE buttons (2, 4, 6,
8, and 10 levels) to adjust the incline level. The HANDRAIL INCLINE UP / DOWN may also be used
• Incline may be adjusted anytime while the running belt is moving.
• The Incline can’t be adjusted if the Safety Key has been removed.
Pulse Grip Feature
• Holding both of the stainless steel hand pulse sensors on the handrails of the treadmill will display your
current Pulse (Heart Rate). A Pulse should be displayed within 15 seconds. Ensure that both your palms
are moist and have proper contact on both sensors.
Calorie Display
• This displays the cumulative calories burned at any given time during your workout.
Note:
This information should only be used as reference between workouts and not
for medical purposes.
OPERATION INSTRUCTIONS