Trojan Beta 300 Series, Operating Instruction

Page: 18 / 22

苏 州 特 鲁 利 电 子 材 料 有 限 公 司
Suzhou Trojan Industry Material Co. ， Ltd
Building A,No.53#, Xinze Road,Singapore Industry Park,Suzhou,Jiangsu Province,
China.
Tel: 0512-67580617 Fax: 0512-67508229 18
In the General tab, the following settings can be set
6.2.1
）
Set the current In and duration
6.2.2
）
Set the Speed of Y/Z empty trip
6.2.3
）
Increasing current IH and increasing amplitude
6.2.4
）
Deceleration current IL and reduction range;
6.2.5
）
Forward and Backward Speed of Y-axis Pulse Cutting
6.2.6
）
Forward and Backward Speed of Z-axis Pulse Cutting
Error tab:
6.3.1
）
If the X + limit switch is damaged, X end point position can be determine by the maximum
travel in the X direction
6.3.2
）
If the Y + limit switch is damaged, Y end point position can be determine by the maximum
travel in the Y direction
6.3.3
）
If the Z + limit switch is damaged, Z end point position can be determine by the maximum
travel in the Z direction