29
28
Replacing Rotor Blades
To replace a rotor blade, follow the steps below:
1
Put the Screwdriver onto the screw in the top of the rotor blade. Gently
turn the Screw Driver counter clockwise.
2
Remove the Rotor Blade from the drone.
3
Press the new rotor blade onto the motor axis and fasten it using the
screwdriver.
Each rotor blade is marked with a “A” or “B”. Be sure to note the marking and
the tilt angle of the rotor blades. When replacing the rotor blades, please install
the right type of blade on the correct position on the drone.
Front left: marking “A”
Front right: marking “B”
Rear left: marking “B”
Rear right: marking “A”
FAQ
Problem: Controller does
not work.
Cause: The batteries have
been incorrectly inserted.
Solution: Check if the
batteries have been correctly
inserted.
Cause: The batteries do not
have enough power.
Solution: Insert new
batteries.
Problem: The drone cannot
be controlled with the
controller.
Cause: The controller is
possibly not correctly paired
with the drone.
Solution: Carry out the
pairing procedure as
described in “Pairing”
(page 10).
Problem: The Drone does
not lift.
Cause: The battery power is
not sufficient.
Solution: Charge the battery
as described in “Charging
FADER” (page 8).
Problem: During flight, the
Drone loses speed and height
without any obvious reason.
Cause: The battery is too
weak.
Solution: Charge the battery
as described in “Charging
FADER” (page 8).
Problem: The drone only flies
in a circle or flips over before
taking off.
Cause: Rotor blades
incorrectly mounted or
damaged.
Solution: Fit rotor blades/
replace rotor blades as
described in “Replacing
Rotor Blades” (page 27).
Problem: Unable to find
photos and videos in App
Gallery.
Solution: Photos and videos
taken with the App are stored
on the mobile device and on
the SD card of the drone.
Photos and videos taken with
the controller are stored on
the SD card of the drone
only.
B
A
A
B
1
3
2
Summary of Contents for FADER
Page 1: ...1 FADER USER GUIDE ...
Page 19: ...36 2693 6 EN ...
