Doc. No. TZ3200C_MN_Ver1.0 Rev 0
13 / 22
TZ3200C ADSL Ethernet Modem User’s Manual
Chapter 3 Configuring the TZ3200C
After you have properly installed the TZ3200C, if you need to change a modem
setting for Router Mode or you want to review the current state of the modem, you
can change the TZ3200C settings with an ordinary web browser such as
Microsoft Internet Explorer.
When the TZ3200C operates in router mode, you must change the modem setting:
refer to the Router mode configuration table. The following table shows the typical
configuration for using the TZ3200C in router mode.
< Table 3.1 Mode Configurations >
Router Mode
ADSL Service
Configuration
Bridge Mode
PPPoA / PPPoE
Static IP
Dynamic IP
VPI/VCI
Enter the value
provided by ISP
Enter the value
provided by ISP
Enter the value
provided by ISP
Enter the value
provided by ISP
Static IP
Address
N/A
N/A (Automatically
Assigned by ISP)
Enter the value
provided by ISP
N/A
(Automatically
Assigned by ISP)
Subnet Mask
N/A
N/A (Automatically
Assigned by ISP)
Enter the value
provided by ISP
N/A
(Automatically
Assigned by ISP)
Default
Gateway
N/A
N/A (Automatically
Assigned by ISP)
Enter the value
provided by ISP
N/A
(Automatically
Assigned by ISP)
Encapsulation
1483 Bridged IP
LLC
PPPoA VC-Mux /
PPPoE LLC
1483 Bridged IP
LLC
1483 Bridged IP
LLC
PPP User
Name
N/A
Enter the name
provided by ISP
N/A N/A
PPP
Password
N/A
Enter the password
provided by ISP
N/A N/A
WAN
DHCP Client
Disable Disable Disable
Enabled
IP Address
N/A 192.168.1.1
(Default)
192.168.1.1
(Default)
192.168.1.1
(Default)
Subnet Mask
N/A
255.255.255.0
(Default)
255.255.255.0
(Default)
255.255.255.0
(Default)
LAN
DHCP Server
Enable Enabled Enabled
Enabled
DNS
N/A
N/A (Automatically
Assigned by ISP)
Enter the value
provided by ISP
N/A
(Automatically
Assigned by ISP)
Note)
When it is N/A, it means it does not apply to the encapsulation.
