Notes on digital operation:
●
This locomotive comes from the factory pro-
grammed for the digital address “01” (Selectrix) /
“03” (DCC). Number of speed levels that have
been set: 28 (DCC) and 31 (Selectrix).
●
It is
not
possible to operate this locomotive in
DCC with opposed DC power in a braking block.
●
Changing the decoder parameters in the
“Selectrix” mode of operation is only possible
with the appropriate Trix components.
The maintenance work necessary after normal
operation of this locomotive is described below.
It is not necessary to open the locomotive for service
work. Please see your authorized Trix dealer for
repairs or spare parts.
In principle the pulling power for this model is limited.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Trix have been installed in Trix products
or where Trix products have been converted in such
a way that the non-Trix parts or the conversion were
causal to the defects and / or damage arising. The
burden of presenting evidence and the burden of
proof thereof, that the installation of non-Trix parts or
the conversion in or of Trix products was not causal
to the defects and / or damage arising, is borne by
the person and/or company responsible for the
installation and / or conversion, or by the customer.
Safety Warnings
●
This locomotive is to be used only with an operating
system designed for it.
●
This locomotive must never be supplied with
power from more than one transformer.
●
Pay close attention to the safety warnings in the
instructions for your operating system.
6
