Trix 22141, Manual, Page: 9 / 36

9
* Changes done under Selectrix will automatically be carried out under DCC and vice versa.
** Higher values do not lead to a further increase in speed.
*** The values for the desired settings must be added.
CV Discription DCC Value
Factory
Setting
DCC / SX1
SX1 Value
1 Adress 1 - 127 3 / 01 01 - 99
2 Minimum speed 0 - 15 0 / — —
3 Acceleration delay 0 - 255 5
3 1 - 7
4 Braking delay 0 - 255 5
5
*
** Maximum speed
0 - 7 6 / 6 1 - 7
8 Factory Reset 8 — / — —
17 Extended address (upper part) CV 29, Bit 5 =1 192 / — —
18 Extended address (lower part) CV 29, Bit 5 =1 128 / — —
29
Bit 0: Travel direction polarity reversal
Bit 1: number of speed levels 14 or 28/128
Bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
Bit 5: Adress size 7 Bit / 14 Bit
Value
0 / 1
0 / 2
0 / 4
0 / 32
***
0, 1, 2, 3, 4, 5, 6, 7,
32, 34, 35, 36, 37,
38, 39
7 —
51 *
Bit 0: Motor polarity reversal
Bit 1: Headlight polarity reversal
Bit 2: Track polarity reversal
0 / 1
0 / 2
0 / 4
***
0 - 7
3 / 4 0 - 7
— ABV on/off — — / 1 1 - 2