TRIVIEW TMG-5002 User Manual Download Page 4

18.

 

Never operation the appliance continuously for more than 3 
minutes at 500W.

 

19.

 

Never press Reversal button (

REV

) when the appliance does 

not absolutely stop.

 

20.

 

This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance 
by a person responsible for their safety. 

21.

 

Children should be supervised to ensure that they do not play 
with the appliance. 

 

INTRODUCTION 

This appliance is equipped with a thermostat system. This system 
will automatically cut off the power supply to the appliance in case 
of overheating. 
If your appliance suddenly stops running: 
1.

 

Pull the mains plug out of the socket. 

2.

 

Let the appliance cool down for 60 minutes 

3.

 

Put the mains plug in the socket. 

4.

 

Press the switch button to turn off the appliance. 

5.

 

Press the circuit breaker button Z at the bottom of the appliance 
to turn on the appliance. 

6.

 

Switch the appliance on again. 

Please contact you dealer of an authorized service center if the 
thermostat system is activated too often. 

 

 
 
 
 

Summary of Contents for TMG-5002










Reviews: