3. When switching into “Rev” mode, you should wait 4 seconds for
motor running.
4. When the temperature of motor reaches 80
℃
, the red warning lamp
starts flashing, and the buzzer sounds, And the indicator shows time
remaining to automatic shutdown of the motor, In a minute after the
warning signal the meat grinder will be shut down automatically to
avoid the motor overheating.
INTRODUCTION
This appliance is equipped with electronic thermostat preventing the
motor from overheating, in case of exceeding the tolerable temperature;
the meat grinder will be shut down automatically.
If your appliance stops operating suddenly:
1.
Disconnect the meat grinder form the mains and pull the plug of the
power cord from the wall outlet.
2.
Press POWER button to switch off the appliances
3.
Let the appliance cool down for 60 minutes
4.
Insert the plug of the power cord back into the wall outlet.
5.
Press Power button, now operation may be resumed..
6.
Press the circuit breaker button Z at the bottom of the appliance to turn on the
appliance.
7.
If overheating protection system triggers very often, please contact
your authorized service center.
Important
1.
Read these instructions for using carefully and look at the
illustrations before using the appliance.
2.
Keep these instructions for future reference.
3.
Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect to the appliance.
4.
Never use any accessories or parts from other manufactures. Your