TRIVIEW EAGLE 3220-21284, User Manual

Page: 51 / 86

7
Remote Control
Remove the battery cover, and insert two AAA (1.5V) batteries; make sure that the polarity of the battery is
consistent with the marks "+/-" in the battery slot.
Point the remote control to the receiver window. The objects between remote control and the receiver
window may disturb the normal operation.
Keep the remote control away from strong vibration. In addition, do not set or put the remote control in
direct sunshine, which may result in deformation of the remote control.
The remote control may be invalid if the receiver window is in direct sunshine or strong light; in this case,
please adjust the angle of the light or the device, or approach the remote control to the receiver window.
The effective range of the remote control may be affected if the battery voltage is low; in this case, please
replace with a new battery; if the remote control won't be used or battery voltage is too low, please take out
the battery to avoid corrosion due to battery liquid leakage.
Do not mix different types of batteries, or used and new batteries.
Do not throw the batteries into fire, charge or break up, or charge, short circuit, disassemble, heat or burn
the used batteries. Please follow the environmental protection regulations to disposal of the batteries.
Installing battery
Precautions of remote control usage
Basic Operations
Remove batteries when the remote is not used for a long time.
TV OPERATION AND SYSTEM SETUP
SELECT INPUT SOURCE
Press SOURCE
button to display the input source list;
Press / button to select the input source you want to watch;
Press
ENTER
button to enter the input source;
5.