manualshive.com logo in svg

Triumph Trophy, Handbook, Page: 149 / 180

Share
Download
Triumph Trophy Handbook Download Page 149

149

Maintenance and Adjustment

Battery Removal

Remove the fastener securing the right hand
cockpit infill panel and remove the panel
from the two front studs/grommets by
pulling upwards and rearwards.

1.

Infill panel

2. Fastener

Remove the battery strap.

Reposition the diagnostic connector and fuse
box bracket.

1.

Battery

2. Negative (black) terminal
3. Positive (red) terminal
4. Battery strap
5. Diagnostic connector and fuse box 

bracket

Disconnect the battery leads, negative (black)
lead first.

Lift the battery out of the case.

Battery Disposal

Should the battery ever require replacement,
the original battery must be handed to a
recycling agent who will ensure that the
dangerous substances from which the battery
is manufactured do not pollute the
environment.

chtd

2

1

chte

2

3

1

4

5

Warning

Ensure that the battery terminals do not
touch the motorcycle frame as this may
cause a short circuit or spark, which would
ignite battery gases causing a risk of
personal injury.

Summary of Contents for Trophy





















































































































































































Reviews:

No comments