Triumph Tiger 900 GT, Owner'S Handbook Manual

Page: 57 / 204

General Information
57
Automatic reset will reset each trip
meter after the ignition has been
switched off for a set time. For more
information, see page 57.
Trip meter 2 can be enabled or disabled.
For more information, see page 58.
Trip Set Up–Manual Reset
To set the trip computer to reset
manually:
• From the TRIP SETUP menu, push
the joystick down and then press
the joystick centre to select TRIP 1
RESET or TRIP 2 RESET.
• Push the joystick centre to select
MANUAL.
There are two options:
• RESET NOW AND CONTINUE–Resets
all trip meter data in the relevant
trip meter.
• CONTINUE WITHOUT RESET–Any
trip meter data in the relevant trip
meter will not be reset.
Trip Set Up–Automatic Reset
To set the trip computer to
automatically reset:
• From the TRIP SETUP menu, push
the joystick down/up and then
press the joystick centre to select
TRIP 1 RESET or TRIP 2 RESET.
• Push the joystick down/up to select
AUTOMATIC and then press the
joystick centre to confirm.
• Using the joystick down/up, choose
the timer setting and press the
joystick centre to confirm the
required time limit.
• The required time limit is then
stored in the trip memory. A tick
is shown to indicate the selected
option.
• When the ignition is turned off, the
trip meter is set to zero when the
time period has elapsed.
The following table shows two examples
of the automatic trip reset functionality.
Ignition
Turned Off
Selected
Time Delay
Trip Meter
Resets to
Zero
10:30 hrs 4 HRS 14:30 hrs
18:00 hrs 16 HRS
10:00 hrs
(next day)