background image

Maintenance

184

Front Suspension Adjustment

Warning

Make sure that the correct balance 

between front and rear suspension is 

maintained.
Suspension imbalance could signifi-

cantly change handling characteristics 

leading to loss of motorcycle control 

and an accident.
Refer to the front and rear suspension 

setting charts for further information 

or consult your dealer.

All models except Tiger 1200 XR are 

equipped with Triumph Semi Active 

Suspension (TSAS).
For more information on TSAS settings 

and adjustment, see page 

108

.

Tiger 1200 XR Model

The front forks on the Tiger 1200 XR 

model are adjustable for compression 

damping and rebound damping.

Note:

•  The Tiger 1200 XR motorcycle is 

delivered from the factory with the 

front suspension set at the Solo 

(Normal) riding settings, as shown 

in the Front Suspension Setting 

Chart (see page 185).

Compression Damping Adjustment

civj

2

1

1. 

Compression damping adjuster (white)

2. 

Fork top cap

The compression damping adjuster is 

located at the top of the left hand fork.
To change the compression damping 

force rotate the (white) adjuster clock-

wise to increase, or counterclockwise to 

decrease.

Note:

•  The setting is measured as the 

number of adjuster clicks counter-

clockwise from the fully clockwise 

(closed) position.

Summary of Contents for Tiger 1200 XR Series



































































































































































































































Reviews: