Triumph Street Triple R 2022, Owner'S Handbook Manual

Page: 194 / 237

CLEANING AND STORAGE
194
Exhaust System Care
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance.
These instructions can be applied to
chrome, brushed stainless steel and
carbon fiber components; matt painted
exhaust systems should be cleaned as
above, noting the care instructions in
the Matt Paintwork section previously.
The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Wash as previously described.
Make sure that no soap or water enters
the exhausts.
Drying
Dry the exhaust system as far as
possible with a soft cloth or chamois
leather. Do not run the engine to dry
the system or spotting will occur.
Protecting
Caution
The use of products containing
silicone will cause discoloration of the
chrome and stainless steel parts and
must not be used.
The use of abrasive cleaning products
will damage the finish and must not be
used.
When the exhaust system is dry, apply
a
suitable proprietary motorcycle
protection spray onto the surface,
following
the manufacturer’s
instructions.
It is recommended that regular
protection be applied to the system as
this will both protect and enhance the
system's appearance.
Seat Care
Caution
Do not use chemicals or high pressure
spray washers to clean the seat.
Using chemicals or high pressure
spray washers may damage the seat
cover.
To help maintain its appearance, clean
the seat using a sponge or cleaning
cloth with soap and water.