Triumph Daytona Moto2 765 2020 Owner'S Handbook Manual Download

Page: 146 / 163

Cleaning and Storage

146

When the exhaust system is dry, apply
a

suitable

proprietary

motorcycle

protection spray onto the surface,
following

the

manufacturer’s

instructions.

recommended

that

regular

protection be applied to the system as
this will both protect and enhance the
system's appearance.

Seat Care

Caution

Use of chemicals or high pressure
spray washers is not recommended
for cleaning the seat.

Using chemicals or high pressure
spray washers may damage the seat
cover.

To help maintain its appearance, clean
the seat using a sponge or cleaning
cloth with soap and water.

Summary of Contents for Daytona Moto2 765 2020




































































































































































Search results

Summary of Contents for Daytona Moto2 765 2020

Reviews:

Related manuals for Daytona Moto2 765 2020

Brands by name

Popular brands

Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Search results

Summary of Contents for Daytona Moto2 765 2020

Reviews:

Related manuals for Daytona Moto2 765 2020

Brands by name

Popular brands