Maintenance and Adjustment
138
Headlight Adjustment - Daytona 675
and Daytona 675 R
Each headlight can be adjusted by
means of vertical and horizontal
adjustment screws located on the rear
of each headlight.
1.
Horizontal adjustment screw
(left hand)
2.
Vertical adjustment screw
(left hand)
3.
Vertical adjustment screw
(right hand)
4.
Horizontal adjustment screw
(right hand)
Switch the headlight dipped beam on.
Turn the vertical adjustment screws on
each headlight counterclockwise to raise
the beam or clockwise to lower the
beam.
On the right hand headlight turn the
horizontal adjustment screw
counterclockwise to move the beam to
the left or clockwise to move the beam
to the right.
On the left hand headlight turn the
horizontal adjustment screw
counterclockwise to move the beam to
the right or clockwise to move the beam
to the left.
Switch the headlights off when the beam
settings are satisfactory.
Headlight Adjustment -
Street Triple, Street Triple R and
Street Triple Rx
Headlight Adjustment - Vertical
1.
Vertical beam adjuster bolts
The vertical beams of the left and right
hand headlights can only be adjusted
together. Independent adjustment is not
possible.
Switch the headlight dipped beam on.
Loosen the clamp bolts sufficiently to
allow restricted movement of the
headlights.
Adjust the position of the headlights to
give the required beam setting.
Tighten the clamp bolts, front first, to
11 lbf ft (15 Nm)
.
Re-check the headlight beam settings.
Switch the headlights off when the beam
settings are satisfactorily set.
chuc
1
4
2
3
1
cgfc_2