General Information
53
• Slide the seat along the seat mount
to the desired position.
• Tighten the nuts to
38 Nm
.
• Rotate the seat back to its original
position. Make sure that the front
of the seat mount is in contact with
the frame.
• Tighten the left hand side fixing to
48 Nm
.
• Install the front fixing and tighten
to
48 Nm
.
Rider's Seat
Bonneville Speedmaster Only
Caution
To prevent damage to the seats or
seat covers, care must be taken not to
drop the seats.
Do not lean the seats against the
motorcycle or any surface which may
damage the seats or seat covers.
Instead, place the seats, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seats
which may cause damage or staining
to the seat covers.
To remove the seat:
Note:
• The rider’s seat is tethered to the
motorcycle by a lanyard.
• Pull the lock release, located at the
front left hand side of the seat,
forwards to release the seat from
its lock.
