Triumph AL7100F, Quick Start Manual

Page: 9 / 18

9
For Customer Service Call 1-888-996-2729
© Escalade Sports
All RIghts Reserved.
STEP 6
PARTS REQUIRED:
16 pcs -
16 pcs -
16 pcs -
H3 M6 x 25 mm Allen Head Bolt 1 pc - P7 Backboard
H5 Wing Nut 2 pcs - P11 Mechanical Scoring Arm
H7 Lock Washer 2 pcs - P12 Rim
1 pc - T1 Allen Wrench 2 pcs -
2 pcs - P18 Mechanical Scoring Arm Support Plate
P14 Rim Support Plate
Attach
Attach
P11
Mechanical Scoring Arms and
P18
Mechanical Scoring Arm Support Plates to the
P7
Backboard using
H3
Bolts
,
H7
Lock washers
and
H5
Wing nuts as shown in
FIGURE 6
.
P12
Rim and
P14
Rim Support Plate
to the
P7
Backboard using
H3
Bolts,
H7
Lock
Washers and
H5
Wing Nuts as shown
in
FIGURE 6.
Use T1 Allen Wrench and Plyers
(not provided) to tighten all Bolts.
FIGURE 7
P9
P7
PARTS REQUIRED:
1 pc - P9 Electronic Scorer
1 pc - P10 Electronic Scorer Face Plate
2 pcs - P13 Rim Net
STEP 7
Attach P9 Electronic Scorer and P10 Electronic
Scorer Face Plate to P7 Backboard as shown
in
FIGURE 7.
NOTE: Place P10 Electronic Scorer Face Plate
into P7 Backboard first, then carefully “press”
P9 Electronic Scorer onto the four tabs on P10 .
You should hear the four tabs “snap”
into place.
Loop the P13 Rim Net through the ram horns
on the P12 Rims as shown in FIGURE 7.
P13
P10
NOTE:
Remove Protective
Coating before
assembly.
P11
P18
P14
P12
P7
H3
H5
H7
FIGURE 6
NOTE:
P11 Mechanical Scoring Arm
sensor plug must pass through
P7 Backboard and P18 Mechanical
Scoring Arm Support Plate.
Note: This is a special rim net
designed to avoid entanglement
with the mechanical scoring arm.`
Net does have a
top and bottom,
The long loops go
to the top.
2019