8 of 10
12.
Refit the rear mudguard using the new screws
provided in the kit. Fit the M6 x 25 mm screws to
the two rear fixing positions and the M6 x 20 mm
screws to the two front fixing positions. Tighten
all fixings to
10 Nm
.
1. Rear mudguard
2. Screw, M6 x 25 mm
3. Screw, M6 x 20 mm
13.
For models where an infill moulding has been
removed from the rear mudguard, attach the
seat latch cable to the retaining clip fitted to the
mudguard.
1. Rear mudguard
2. Seat latch cable
3. Retaining clip
4. Mounting rack
14.
Reconnect the battery, positive (red) lead first.
15.
Refit the seat, as described in the Owner’s
Handbook.
Mounting Platform Installation
Street Twin and Street Scrambler Models
1.
Position the mounting platform on the mounting
rack ensuring the two location pegs on the
mounting rack locate in the mounting platform,
as shown below.
1. Mounting platform
2. Location pegs, mounting rack
Bonneville T100 and Bonneville T120 Models
1.
Position the mounting platform on the mounting
rack and align the four fixing positions on the
mounting platform with the fixing positions on
the mounting rack, as shown below.
1. Mounting platform
2. Fixing point, mounting rack
4
2
1
3
2
1
3
4
2
1
2
1
2
