4 of 8
4.
Loosely assemble the stem, tapered nut and
M6 x 40 mm screw, as shown below.
1. Stem
2. Tapered nut
3. Screw, M6 x 40 mm
5.
Fit the stem assembly into the headstock,
through the hole in the new top yoke nut.
Ensure the aperture in the stem is aligned
centrally, as shown. Tighten the screw to
8 Nm
.
1. Stem assembly
2. Screw
3. Nut, top yoke
6.
Fit the phone holder mounting to the stem, as
shown and secure with the M6 x 16 mm screw.
Do not fully tighten the screw at this stage.
1. Stem
2. Mounting, phone holder
3. Screw, M6 x 16 mm
Installing and Removing the Phone Holder
7.
Loosely fit the security strap around the stem
on the top yoke and feed the plain end of the
strap through the D-ring. Do not pull the strap
tight around the stem at this stage to allow
access to the M6 x 16 mm screw.
1. Stem
2. Security strap, plain end
3. D-ring
4. Screw, M6 x 16 mm
2
1
3
2
1
3
2
1
3
2
1
3
4
