DUAL Touch Series
TRIUMPH BOARD a.s.
Page 22 of 27
DUAL Touch configuration Main Manual
Right click the icon to show the Main Menu of
DUAL Touch configuration.
c)
Wireless Setting
For wireless use you need to order
Wireless Upgrade Kit
(EAN 8592580091216) which includes USB Wireless
Receiver and Power Adaptor. Wireless option is available only for the DUAL Touch USB / Wireless ready models
(EAN: 8592580101168, EAN: 8592580101175)
d)
Calibration
Calibration for DUAL Touch after first time installation or projector size and projector’s position has changed.
Click the flashing cross to calibrate, press ESC to exit. Point on each coordinates accurately. The coordinates
will be moved continually until the calibration is completed.
30 wireless channels are available for selection.
To change channel or pairing your DUAL Touch board,
click “scan“ then the detected sensors will show onto the
table.
Select the “IWB Name” onto the list and click “Pair” to make
pairing for the Receiver and Sensor. This is recommended
to rename for the Sensor unit after you made pairing so as
not to mix up with other sensors those installed nearby.
Click “Un-pair” to release channel lock.
Make sure to click “Un-pair” and re-do pairing if Sensor Unit
or Wireless Receiver has been changed.
*IWB = Interactive White Board
