© 2016 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
PARTS REQUIRED:
6 pcs -
H3
Phillips Round Head Screw
2 pcs -
P6
Goal Box with Sensors
2 pcs -
H4
Phillips Round Head Screw
1 pc -
P7
Electronic Scorer
STEP 3:
First, feed the sensor plug from each
P6
Goal Box with Sensors through each end apron and underneath table support
frames as shown in
FIGURE 3
and
UNDERNEATH TABLE DIAGRAM
. Guide the sensor wires following the path shown
with the arrows in
FIGURE 3
and
THE UNDERNEATH TABLE DIAGRAM
from the goal box pass through one side apron
and connect to
P7
Electronic Scorer as shown in
FIGURE 3
.
Secure
P6
Goal Box with Sensors onto
P1
Air Hockey Cabinet using pilot holes with
H3
Phillips Round Head Screws as
shown in
FIGURE 3
.
Tighten, But do not strip out H3 Screws.
Secure
P7
Electronic Scorer
P1
Air Hockey Cabinet using pilot holes with
H4
Phillips Round Head Screws as shown in
FIGURE 3
.
Tighten, But do not strip out H4 Screws.
Remove the battery cover from
P7
Electronic Scorer and insert
2 AAA Batteries (not included)
into the battery box.
Connect
A4
AC/DC Adapter onto
C1
DC Motor (underneath table) as shown.
UNDERNEATH TABLE
C1
DC Motor
GOAL BOX
GOAL BOX
IMPORTANT NOTE:
Be sure to route the goal box sensor
wires thru the support beam cutouts
for correct assembly.
IMPORTANT NOTE:
As you attach the
P6
Goal Boxes,
make sure to very lightly pull any
excess wire thru the end apron that
may be blocking the electronic scoring
sensor eyes.
P6
H3
P1
P6
FIGURE 3
C1
DC Motor
(underneath table)
H4
P7
ELECTRONIC SCORER
IMPORTANT NOTE:
Be sure to route the goal box sensor
wires thru the support beam cutouts
for correct assembly.
C1
DC Motor
(underneath table)
A4
