UNPACKING THE GAME
Unpack your new dartboard carefully, making sure all parts are included. The following components are included in this set:
1 Electronic Dartboard
6 Darts (unassembled)
Soft tip replacement pack
Ac Adapter
Owner’s Manual
Memory Card (Inside dartboard)
MOUNTING INSTRUCTION
Choose a location to hang the dartboard where there is about 10
feet of open space in front of the board.
The “toe-line” should be 7’9
1/4” (2.37 M) from the face of the dartboard for steel tip rules or 8
feet for soft tip rules. You will need to mount the board close to an
electric outlet if your dartboard requires an AC adapter. Locate a
wall stud
and place a mark 76.75” from the floor. Insert a screw in
the center of the wall stud at this height and hand the dartboard on
this screw.
If not mounting into studs, be sure to use drywall anchors or other
securing hardware appropriate to the wall you are using.
If you want to mount the dartboard even more securely to the wall,
you can fasten four screws (not included) through the holes located
in the catch ring area (the area outside the scoring segments).
This will further secure the board to the wall. Center of bulls eye
should be 5’ 8” from the ground. Plug the A/C adapter into the wall
outlet and into
the jack at the button of the dartboard and you’re
ready to play.
DARTBOARD FUNCTIONS
START button
- This multi-function button is used to:
: the game when all options have been selected.
: to the next player when one player is finished with his round.
This will put dartboard in HOLD status between rounds to allow player to remove darts from the target area.
DIRECTION buttons
– Press to move the cursor:
Up button
- go up; Cancel a dart throw during a play;
Left button
- go left;
Right button
- go right;
Down button
- go down;
BACK button
- Press to go back; Press and hold for 3 second to turn off software;
POWER SWTICH-
Press to turn off power
;
ELECTRONIC DARTBOARD OPERATION
1.
Plug adapter to activate dartboard.
2.
Press
UP
and
DOWN
buttons to browse among
GAMES
,
CAREER GAMES
,
PLAYER INFO
,
OPTIONS
and
RATING
and press
START
button to choose the operation.
3.
Choose
GAMES
if you want to have a quick game. You can’t choose characters and the score will be not recorded to player’s history.
Press
UP
and
DOWN
buttons to select games and press
START
button to confirm. Choose game variations and press
START
button to
go to next step. Press
UP
and
DOWN
buttons to select number of players and press
START
button to confirm. Game start~
4.
Choose
CAREER GHAMES
if you wish the playing score to be recorded to player’s history. Press
UP
and
DOWN
buttons to browse
among 01 Games, Cricket and Count up and press
START
button to choose the desired game. Choose game variations and press
START
button to go to next step. Press
UP
and
DOWN
buttons to select number of players and press
START
button to confirm. Next
step is to choose/ set up characters.
5.
To set up a character, choose
New Role
and press
START
button. Enter desired name by pressing
UP
and
DOWN
buttons to choose
244 cm
8 ft.(96
”)
