3 of 9
Technical Bulletin
197
Issue
1
9.
Connect the crankshaft position sensor the main harness.
L0332
1
1.
Crankshaft position sensor connector
10.
Connect the ground cables to the frame and tighten the fixing to 10 Nm. Refit the rubber boot over the
battery ground cable.
11.
Attach the two harness brackets to the engine breather cover and tighten the fixings to 10 Nm.
L0328_1
1
2
1
3
4
5
1.
Harness brackets
2.
Fixings
3.
Rubber boot
4.
Ground cable fixing
5.
Purge valve bracket
12.
If removed, secure the purge control vale to its bracket with a cable tie.
Perform the following operations as described in the service manual:
• Coolant Expansion Tank - Installation
• Front Sprocket Cover - Installation
• Throttle Bodies/Injectors - Installation
• Airbox - Installation
• Fuel Tank - Installation
• Battery - Installation
• Seat - Installation
When ordering replacement parts, refer to the EPC.
Please mark your copy of the Service Manual with this information. For electronic service manuals, store
this information in a readily accessible place and refer to it when working on the relevant Triumph
motorcycle. This information will be included in the next service manual update.
