Assembly Tips
:
Attention:
If you are using an electric screw driver in assembly, please set at low torque and
do not over tighten the hardware. When assembling individual parts, loosely tighten screws
until all screws are inserted, then tighten completely.
Assembly Instructions
NOTE:
Parts are
Do not Strip Out Any Screws.
packed inside the table cabinet. Remove the Billiards
Playfield (#38). Inside the table cabinet you will find all the parts needed
to assemble your table.
PRE-INSTALLED PARTS (Factory Installed)
NOTE: We recommend that two adults work together to assemble this game.
Find a clean, level place to begin the assembly of your Air Hockey Table. The table will be
assembled upside down and then turned over on its legs once the assembly is completed.
Remove all the parts from the box and verify that you have all of the parts as shown on the
parts list above. Carefully cut or tear the four corners of the box so that the bottom of the box
can be used as your work surface.
3.5mmx19mm Screw
Plastic Nut
Plastic Pivot Bolt
T-Nut
Air Blower and wIre
P7
P8
P9
6 pcs
2 pcs
2 pcs
8 pcs
1 pc
P3
P6
6
