56
English
Appendices
Lamp Replacement Procedure:
1. Switch off the power to the projector by pressing the “ ” button.
2. Allow the projector to cool down for at least 30 minutes.
3. Disconnect the power cord.
4. Unscrew the one screw on the cover. 1
5. Lift up and remove the cover. 2
6. Unscrew the three screws on the lamp module. 3
7. Lift up the lamp handle and remove the lamp module slowly and carefully. 4
To replace the lamp module, reverse the previous steps.
8. Turn on the projector and use “Lamp Reset” after the lamp module is
replaced.
Lamp Reset: (i) Press “Menu”
(ii) Select “OPTIONS”
(iii) Select
“Lamp Settings”
(iv) Select “Lamp Reset”
(v) Select “Yes”.
The screws on the
lamp cover and the
lamp cannot be
removed.
The projector
cannot be turned
on if the lamp
cover has not been
placed back on the
projector.
Do not touch the
glass area of the
lamp. Hand oil can
cause the lamp to
shatter. Use a dry
cloth to clean the
lamp module if it
was accidentally
touched.
1
2
3
4
57
English
Appendices
Replacing and cleaning the dust
filter
W
e recommend cleaning the dust filter after every 300 hours
of use, clean it more often if the projector is used in a dusty
environment.
When you see this message, please find following steps for
cleaning procedure:
If dust builds up
on the filter is
not cleaned, the
projector will over
-
heat and cause
problems with
the operation and
shorten the life of
the product.
Cleaning the Dust Filter Procedure:
1.
Switch off the power to the projector by pressing the “ ” button.
2.
Disconnect the power cord.
3.
Unscrew the one screw on the
c
able cove
r
.
1
4.
Lift up and remove the cable cove
r
.
2
5.
Push the latch by the arrow direction. 3
6.
Remove the dust filter slowly and carefully.
4
7.
Clean or replace the dust filte
r
.
5
T
o install the dust filte
r
, reverse the previous steps.
8.
T
urn on the projector and use “Reset Dust Filter” after the dust filter is
replaced.
Filter Reset: (i) Press “Menu”
(ii) Select “OPTIONS”
(iii) Select
“Reset Dust Filter”
(iv) Select “
Y
es”.
1
2
3
4
5
2
3
4
5
Summary of Contents for PJ200
Page 1: ...English PROJECTOR PJ200 250 UST DLP ...
Page 2: ......
Page 26: ...24 English User Controls ...
