10-18
Troubleshooting > Troubleshooting
Cannot print the
specified number of
copies.
—
Only one copy is available. Select
[
Continue
] to continue printing.
Select [
Cancel
] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Uncheck [
RAM Disk
] in the
[
Device Settings
] tab of the
printer's properties.
NOTE
If you unchecked the [
RAM Disk
],
check the [
RAM Disk
] again after
the printing is completed. If not,
print speed may be reduced.
—
Do you want to print the data stored
in the USB memory?
Only one copy is available. Select
[
Continue
] to continue printing.
Select [
Cancel
] to cancel the job.
The machine may reproduce the
same originals by arranging the
following settings:
•
Reduce the number of copies to
be printed at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
•
Select [
Copy Priority
] of
Optional Memory in System
Menu.
NOTE
Before changing the Optional
Memory setting, contact your
administrator.
Cannot process this
job.
―
This job is canceled because it is
restricted by User Authorization or
Job Accounting. Select [
End
].
―
Cannot recognize.
―
Make sure your ID card has been
registered.
Card
Authentication
Kit(B)
Operation
Guide
Cleaning the laser
scanner…
—
The machine is under the
adjustment to maintain its quality.
Please wait.
―
*1 When Auto Error Clear is set to [
On
], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Message
Checkpoints
Corrective Actions
Reference
Page
