Triumph Adler P-C2655w, Operation Manual

Page: 285 / 421

8-32
Setup and Registration (System Menu) > System Menu
SNMPv3 -
Protocol Setting Select whether to communicate using SNMPv3.
*1
Value : Off, On
Available Network
(Wi-Fi Direct) Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ Protocol Setting ] is set to [ On ].
Available Network (Wi-Fi)
Available Network
(Wired Network)
HTTP -
Protocol Setting Select whether to communicate using HTTP.
*1
Value : Off, On
Available Network
(Wi-Fi Direct) Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ Protocol Setting ] is set to [ On ].
Available Network (Wi-Fi)
Available Network
(Wired Network)
HTTPS -
Protocol Setting Select whether to communicate using HTTPS.
*1, *2
Value : Off, On
Available Network
(Wi-Fi Direct) Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ Protocol Setting ] is set to [ On ].
Available Network (Wi-Fi)
Available Network
(Wired Network)
IPP -
Protocol Setting Selects whether to receive documents using IPP. To use the IPP protocol, select [ Not Secure
(IPP&IPPS) ] on IPP Security under Security Settings from the Embedded Web Server RX.
*1
Value : Off, On
Port Number Set the IPP default Port Number. The default port number is 631.
Value : 1-32767
NOTE
This function is displayed when [ Protocol Setting ] is set to [ On ].
Available Network
(Wi-Fi Direct) Set whether to enable this function for each network.
Value : Disable, Enable
NOTE
This function is displayed when [ Protocol Setting ] is set to [ On ].
Available Network (Wi-Fi)
Available Network
(Wired Network)
Item Description