Triumph Adler P-4532DN Operation Manual Download

Page: 229 / 282

10-15

Troubleshooting > Troubleshooting

Responding to Messages

If the message display or the computer displays any of these messages, follow the corresponding procedure.

NOTE

When contacting us, the serial number will be necessary. To check the serial number, refer to the following:

Checking the Equipment's Serial Number (page i)

Message

Checkpoints

Corrective Actions

Reference

Page

A machine
administrator right is
required.

―

You can only change the settings
selected when logged in as a user
with machine administrator
privileges.

—

Access denied.
You cannot login.

―

The Log in operation failed for the
specified number of times so it is no
longer possible to attempt to log in.
Contact a system administrator.

—

Access point was not
detected.

―

Check if the access point has been
set correctly.

page 8-24

Account error.
Press [OK].

―

Failed to specify Job Accounting
when processing the job externally.
The job is canceled. Select [

—

Add paper in BulkFee.

―

The paper has run out in the paper
source displayed. Supply paper
according to the paper source
displayed (optional Bulk Paper
Feeder).

—

Add paper in cassette #.

Is the indicated cassette out of
paper?

The paper has run out in the paper
source displayed. Supply paper
according to the paper source
displayed (paper cassettes, MP
tray, or optional paper feeders).

page 3-4

Add paper in MP tray.

Is the paper of the selected size
loaded in the multi purpose tray?

page 3-11

Administrator only.

―

You can only change the settings
selected when logged in as a user
with administrator privileges.

page 9-5

Message

Checkpoints

Corrective Actions

Reference

Page

Box limit exceeded.

*1 When Auto Error Clear is set to [

], processing resumes automatically after a set amount of time elapses. For details

on Auto Error Clear, refer to the following:

Auto Err. Clear (page 8-32)

―

The specified box is full, and no
further storage is available; Job is
canceled. Press [

End

]. Try to

perform the job again after printing
or deleting data from the box.

―

Summary of Contents for P-4532DN



























































































































































































































































































Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands

Triumph Adler P-4532DN, Operation Manual

Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands