3-2
Sending Faxes > Basic transmission procedure
Basic transmission procedure
The basic procedure for using the fax system is explained below.
1
Press the [
FAX
] key.
The base screen for fax appears.
2
Place the originals.
Refer to the machine’s
Operation Guide
for placing originals.
3
Select the transmission method.
There are two transmission methods: memory transmission and direct transmission.
Memory transmission:
The original is scanned into memory before communication starts.
Memory transmission is selected by default.
Direct transmission:
The destination is dialed and communication starts before the original is
scanned.
For details, refer to
FAX Direct Transmission on page 3-23
.
4
Specifying destination.
Enter the fax number of the receiving system using the numeric keys.
For the procedure for selecting a destination in the address book, refer to
Choosing from the
Address Book on page 3-13
.
For the procedure for selecting the destination using the One Touch Key, refer to
Choosing by One
Touch Key on page 3-15
.
Ready to send.
2013/08/08 10:10
Quiet
FAX Res.
200x100dpi
Off
FAX No. Entry:
Chain
Detail
0123456789
