Triumph Adler LP 4335 Instruction Handbook Manual Download Page 94

Page: 94 / 108

3-6

Option

CompactFlash (CF) Card

The printer is equipped with a slot for a CF card with the maximum size
of 256MB. A CF card is useful for storing fonts, macros, and overlays.

Turn off the printer and disconnect the power cord and printer cable.

Open the rear cover.

Remove the screws and the optional interface slot cover.

Insert the CF Card.

Secure the optional interface slot cover with the screws removed in
step 3.

Connect the power cord and printer cable and turn on the printer.

USB Flash Memory

See your dealer for purchasing information of this optional device that
are best suited for use with this printer.

CAUTION

Before inserting a CF card in the printer, make

sure that the printer is switched off.

Summary of Contents for LP 4335













































































































Search results

Summary of Contents for LP 4335

Reviews:

Related manuals for LP 4335

Brands by name

Popular brands

Triumph Adler LP 4335, Instruction Handbook Manual

Search results

Summary of Contents for LP 4335

Reviews:

Related manuals for LP 4335

Brands by name

Popular brands