Triumph Adler DF 470, Service Manual

Page: 58 / 66

5JS
2-3-2
Connector Pin Signal I/O Voltage Description
CN1
1 DF_CLK I 0/5 V DC (pulse)
Clock signal
Connected to
DF Relay
PWB
2 DF_SI O 0/5 V DC (pulse)
Serial communication data signal output
3 DF_SO I 0/5 V DC (pulse) Serial communication data signal input
4 DF_SEL I 0/5 V DC Select signal from the machine
5 DF_RDY O 0/5 V DC
Ready signal to the machine
6 DF_SET O 0/5 V DC
Set signal to the machine
7 +24V I 24 V DC 24 V DC power input from DFRPWB
8 +24V I 24 V DC 24 V DC power input from DFRPWB
9 +24V I 24 V DC 24 V DC power input from DFRPWB
10 GND - - Ground
11 GND - - Ground
12 GND - - Ground
CN5
1 T_LL_SEN I 0/5 V DC TLLS: On/Off
Connected to
the tray upper
limit sensor
and tray lower
limit sensor
2 SGND - - Ground
3 +5V O 5 V DC 5 V DC power output to TLLS
4 T_UL_SEN I 0/5 V DC TULS: On/Off
5 SGND - - Ground
6 +5V O 5 V DC 5 V DC power output to TULS
7 NC - - Not used
CN6
1 +5V O 5 V DC 5 V DC power output to PSS1
Connected to
the paper sur-
face sensor 1/
2
2 SGND - - Ground
3 RHDS1 I 0/5 V DC PSS1: On/Off
4 +5V O 5 V DC 5 V DC power output to PSS2
5 SGND - - Ground
6 RHDS2 I 0/5 V DC PSS2: On/Off
CN7
1 +5V O 5 V DC 5 V DC power output to EPS
Connected to
the eject
paper sensor
and adjust-
ment sensor
1/2
2 SGND - - Ground
3 EMPS I 0/5 V DC EPS: On/Off
4 +5V O 5 V DC 5 V DC power output to ADS1
5 SGND - - Ground
6 FJ_HPS I 0/5 V DC ADS1: On/Off
7 +5V O 5 V DC 5 V DC power output to ADS2
8 SGND - - Ground
9 RJ_HPS I 0/5 V DC ADS2: On/Off