Triumph Adler DCC 2526, Instruction Handbook Manual

Page: 273 / 311

Section 9 TROUBLESHOOTING
9-3
“Memory full.” Operation has been stopped because the copier’s memory is full. Press the
“OK” key.
If the error occurred during scanning of originals, press either the
“Continue” key or the “Cancel” key, as appropriate.
“Continue”: Copies will be made for those originals that have already been
scanned.
“Cancel”: Delete all of the scanned data. ---
“Add paper in drawer x .”
[“Add paper cassette x .”]
There is no paper in the indicated drawer[cassette]. Load paper of the
indicated size. 3-1
“Duplex tray inoperable, call service.”
[“Duplex unit is out of order. Call service.”] The Duplex Unit is out of order and 2-sided copying is not possible. Contact
your service representative or authorized service center immediately. ---
“Remove paper from duplex unit.” There is paper remaining inside the Duplex Unit. Remove that paper. ---
“Install duplex unit.” (Only in duplex copiers) The Duplex Unit is not inserted properly. First
pull it out, and then push it all the way back in. ---
Message Procedure
Reference
page